TRUCK OR TREAT! Unlock discounts and free gifts. When you spend more, you get more! — Use Coupon Code: SPOOKY26 SPOOKY26 ℹ️
Browse Walcott Radio

Walcott Radio

★ 4.2 (142 reviews)·362 products·$1.00 – $849.95
Shop by type
Truck or Treat — SPEND MORE, GET MORE — Unlock Discounts and Free Gifts! You may not get candy, but you do get to fill up your bucket with something even better—no costume required. · ends Oct 31 Code SPOOKY26 See details
362 products ·24 sold out ·201 discontinued ↓
SST-30102 Folding Torx key set
Sale
Walcott Radio SST30102
Folding Torx Bit Key Set 7PC
  • Includes 7 Different Torx Sizes
  • T10 / T15 / T20 / T25 / T27 / T30 / T40 Bits
$9.95 $10.95Save $1.00
In Stock
Kenworth T680 and T880 CB Antenna Mounting Bracket
Walcott Radio PC-A68-02
Kenworth T680 and T880 CB Antenna Mounting Bracket
  • Mounts over the existing antenna mount
  • Allows for a grounded installation without the factory cable
  • Works on any oval shaped mirror arm for 2013+ T680/T880 Trucks
$39.95
In Stock
Universal Spot Mirror Antenna Mount
Walcott Radio PCA60
Universal Spot Mirror Antenna Mount
  • Easy Installation
  • Attaches to any existing spot mirror location
  • Universally Compatible. Freightliner P3 and P4 Cascadia, International Prostar and Lonestar, Peterbilt 579 series, and more.
$24.95
In Stock
Replacement Satellite Coax Cable
Walcott Radio MSSATCABLE
Replacement Satellite Coax Cable
  • Replacement Coax Cable for Satellite Antennas (XM or Sirius)
  • 21' Long
$22.95
In Stock · only 6 left
Dipole Antenna Mount - Bracket Only - DP4M
Walcott Radio DP4M
Dipole Antenna Mount - Bracket & Studs- DP4M
  • Bracket & Studs Made for Creating Your Own Di-pole Antenna
  • Cable, and Antennas Not Included
  • Compatible with masts up to 1.5" diameter (not included)
$34.95
In Stock
Antenna Fold Over Adapter - 203EZ
Walcott Radio EZ1
Antenna Fold Over Adapter - EZ1
★★★★★3.0 (3)
  • Easilly fold your CB antenna down when not in use
  • Antenna management
  • No tools needed!
$13.95
In Stock
Radiobag CB Radio Tote with Shoulder Strap
Walcott Radio RADIOBAG
Radiobag CB Radio Tote with Shoulder Strap
★★★★★5.0 (2)
  • Carrying bag for CB Radios
  • Includes slots in back for power and antenna connections
  • Side pockets for holding accessories, microphones, etc
$12.95
In Stock
microphone adapter for Anytone at-6666 or radioddity qt80
Sale
Walcott Radio ADAPTER_6P_ANYTONE
Anytone AT6666 Microphone Adapter 4-pin to 6-pin
  • Compatible with Anytone AT-6666 & Radioddity QT80 10 meter radio (does not work with AT5555 or AT5555N)
  • Converts your 4-pin microphone to 6-pin
  • No soldering required, removable!
$19.95 $29.95Save $10.00
In Stock
Dodge Ram Fender Antenna Mount and Coax for 2019 - 2023 Ram 1500, 2500, and 3500 Trucks
Sale
Walcott Radio DODGE4
Fender CB Antenna Mount and Coax for 2019+ Ram Trucks
  • RAM 1500 / 2500 / 3500 / 4500 / 5500 | 2019+
  • Not Compatible with Dodge Ram 1500 Classic - Click here for the 1500 Classic version
  • Includes 12' EZ-Install Coax and Stud
$59.95 $68.44Save $8.49
In Stock
universal magnetic cooling fans for 10 meter radios
Walcott Radio K-605
K-605 Magnetic Cooling Fans - Universal
  • Rated for 150°F ambient temperature. Do not install or store in direct sunlight or on vehicle dashboards
  • Twin 40mm Cooling Fans
  • Magnetic Mounting
$39.95
In Stock · only 6 left
Double radio stand for highpowered 10 meter and cb radios
Walcott Radio K-630D
K-630D Double Radio Stand for High Powered 10 Meter & CB Radio
  • Rated for 150°F ambient temperature. Do not install or store in direct sunlight or on vehicle dashboards
  • Designed for DX 10 meter radios with bottom heatsinks
  • Extended build allows for two radios to be mounted
$39.95
In Stock
9' RG8X CB Coax Cable 98X
Walcott Radio 98X
9 ft RG8X CB Coax Cable 98X
★★★★★5.0 (1)
  • 9 Foot CB Coax Cable
  • 50 Ohm
  • Hand-Soldered PL-259 Connectors
$20.95
In Stock
Extra Long Radio Bracket DXXX
Walcott Radio DXXX
Extra Long Radio Bracket DXXX
  • Extra Long Heavy Duty 10 Meter Radio Bracket
  • Capable of supporting two radios
  • Length: 9", Width: 8", Depth: 3"
ReplacesDXXXBXXX
$22.95
In Stock
Co-Phase Coax Cable - DH18P
Walcott Radio DH18P
Co-Phase Coax Cable - DH18P
★★★★★5.0 (1)
  • 18 Feet Long (each side) Co-Phase Dual Antenna Cable
  • 75 Ohm
  • Hand Soldered PL-259 Connectors
$34.95
In Stock
Tripod and 5 Foot Antenna Mast Combo
Walcott Radio EZ-22-3A-518SW
3ft Tripod and 5 Foot Antenna Mast Combo
  • 5', 1 1/4" Wide Antenna Mast
  • Can be linked together to great a longer mast
  • Commonly used as a mount for base station antennas
$84.90
In Stock
Dynamic 4-Pin CB Microphone
Walcott Radio CM4
Dynamic 4-Pin CB Microphone
  • Stock CB & 10 Meter Replacement Microphone
  • Pre-wired 4-Pin standard
  • Heavy Duty Super Flexable Cord
$21.95
In Stock
Freightliner Cascadia Mirror Arm Perch Antenna Mount
Walcott Radio SSR50C
Freightliner Cascadia Mirror Arm Perch Antenna Mount
★★★★★2.5 (2)
  • Freightliner Cascadia P3 or P4 Drivers or Passengers side Mirror Mount
  • Bolts onto one of the 4 bolts that hold the mirror to the door
  • Provides a grounded mount for CB antennas
$19.95
In Stock
2-Pin Anderson to 3-Pin Radio Power Adapter
Walcott Radio DX-3PIN-ADAPTER
2-Pin Anderson to 3-Pin Radio Power Adapter
  • Adapts a 2-pin Anderson power cord to a 3-Pin Radio
  • Soldered connections
  • Fuses & fuse holders included
$29.95
In Stock · only 5 left
Online only
2-Pin Anderson to 6-Pin Radio Power Adapter
Walcott Radio DX-6PIN-ADAPTER
2-Pin Anderson to 6-Pin Radio Power Adapter
  • Adapts a 2-pin Anderson power cord to a 6-Pin Radio
  • Soldered connections
  • Fuses & fuse holders included
$44.95
In Stock · only 1 left
Online only
Right Angle Coax Adapter
Walcott Radio RPM359
Right Angle Coax Adapter
  • PL-259 (M) to PL-259 (F) Adapter
  • Right angle adapter commonly used at the back of radios
Replaces360-359
$6.95
In Stock
C4P5C Microphone Adapter 4 Pin to 5 Pin
Walcott Radio C4P5C
C4P5C Microphone Adapter 4 Pin to 5 Pin
  • Convert your standard 4-PIN microphone into a 5-Pin Cobra or Uniden microphone
  • Works with Cobra 148 and Uniden Grant CB radios
$5.95
In Stock
KDT - Twist Quick Disconnect
Walcott Radio KDT
KDT - Twist Quick Disconnect
★★★★★5.0 (1)
  • Accepts standard 3/8x24" Thread Antennas up to 3 feet.
  • Unscrew your antenna by hand
  • Quick disconnect
$9.95
In Stock
UG363 Double UHF PL259 Female Connector
Walcott Radio UG363
UG363 Double UHF PL259 Female Connector
  • PL-259 (F) to PL-259 (F) Adapter
  • Commonly used to connect two pieces of coax together with the option of mounting this adapter through a hole
$7.95
In Stock
Magnetic CB Microphone Mount
Walcott Radio RP-234
Magnetic CB Microphone Mount
  • Microphone clip mount with built-in magnet
  • Works with any microphone that has a "mounting button" on the back
Replaces360-234
$3.79
In Stock
UHF Weather Cap
Walcott Radio UHFC
UHF Weather Cap
  • Used on Wilson Magnet & Roof Antennas With Removable Load Coil
  • Works with all UHF style antenna mounts
  • Keep the weather out when you remove your antenna
$3.99
In Stock
Universal Base Station Antenna Ground Plane Kit
Walcott Radio PCGPK-1
Universal Base Station Antenna Ground Plane Kit
★★★★★5.0 (1)
  • Improves performance by 30%
  • Installs at the base of all ProComm base station antennas
  • Includes (4) 4' long fiberglass radials with aluminum mounting hub
$36.95
In Stock
NMO Weather Cap
Walcott Radio RC1
NMO Weather Cap
  • Works with all NMO mounts
  • Covers your mount when the antenna is removed to prevent weathering
$3.49
In Stock
UHF to Standard 3/8 Antenna Adapter
Walcott Radio UHF3824
UHF to Standard 3/8 Antenna Adapter
  • Connect your 3/8 x 24" antenna to a UHF style mount
  • This allows for CB antennas to mount to HAM mounts, for example
$16.95
In Stock
SP80075BN - Spider Base Station Scanner Antenna
Walcott Radio SP80075BN
SP80075BN - Spider Base Station Scanner Antenna
★★★★★4.5 (2)
  • Picks up everything between 30-1200 Mhz
  • Includes 75' Of Coax Cable and Mounting Hardware
  • Improve your scanner's range by up to 10x with this antenna
$62.95
In Stock
1' Coax Jumper 18X
Walcott Radio 18X
1 ft Coax Jumper 18X
★★★★★5.0 (1)
  • 1ft Coax Jumper
  • Great for SWR meters, power meters, amplifiers and antenna switches
  • 50 ohm cable, PL259 to PL259
$13.49
In Stock
IMAF CB antenna to AM/FM Antenna Splitter
Walcott Radio IMAF
IMAF CB antenna to AM/FM Antenna Splitter
  • Use your CB antenna for both AM/FM radio AND your CB * easy installation * 50 watt power rated * Includes coax 18" coax jumpers for CB and AM/FM radio
$34.95
In Stock
Currently unavailable · 24

Guides & how-tos

Learning Center →

Walcott Radio questions

Should there be continuity on the base of the Proton PT99 antenna?

Yes! If you measure continuity on most base station antennas, you will read a shorted connection between the center pin and ground. This is normal!

Step-by-Step Antenna Tuning Guide:
1. Install the SWR Meter in Line
Turn off your radio. Locate the coaxial cable connecting your radio to the antenna.
Disconnect the coaxial cable from the back of the radio.
Connect the coaxial cable coming from the antenna to the antenna (ANT) port on the SWR meter.
Use a short length of coax to connect the transceiver (TX) port on the SWR meter to the radio's antenna jack.

2. Set the Meter to FWD (Forward)
Turn the SWR meter's switch to the FWD position.
Set your radio to the lowest possible power output (usually in AM or CW mode).
Select the frequency or channel where you intend to test your antenna's SWR (usually near the middle of the band).
Key the microphone (transmit without speaking) or use a CW key to transmit a steady signal.

3. Calibrate the SWR Meter
While holding down the transmit button (keyed up), adjust the calibration (CAL) knob on the SWR meter.
Turn the knob until the needle is aligned with the SET mark on the meter's scale (usually located near the far right side).
This step ensures the meter is correctly reading the forward power (transmitted signal).

4. Switch to REF (Reflect)
After calibrating the meter in FWD mode, release the transmit button and switch the meter to REF (Reflect).
Key the microphone again (transmit) to check the reflected power reading, which indicates how much of the transmitted power is being reflected back from the antenna.

5. Interpret the Results
Low SWR (around 1:1 to 1.5:1): Indicates a well-matched antenna system with minimal power reflected.
Moderate SWR (1.5:1 to 2:1): This is acceptable but may indicate some room for improvement in the antenna tuning or placement.
High SWR (above 2:1): Indicates significant reflected power, which could harm your transmitter. You may need to adjust your antenna or use a different one to bring the SWR down.

6. Adjust Antenna if Necessary
If your SWR reading is too high, adjust the antenna's length or position and re-test.
Repeat steps 2-5 after each adjustment to check if the SWR has improved.

7. Turn Off the SWR Meter
After taking the readings, turn off the radio and disconnect the SWR meter.
Reconnect the coaxial cable from the antenna directly to the radio.
Tips for Best Results
Test across multiple frequencies to ensure your antenna performs well across the whole band.

Always start with low power to avoid damage to your equipment. Keep your coaxial cables in good condition to avoid issues with the SWR readings caused by damaged cabling.
What is an SWR meter and why would I need one?

SWR (Standing Wave Ratio) meters measure the efficiency of your antenna system by comparing the power sent to the antenna and the power reflected back. A low SWR indicates that your antenna is well-tuned and is efficiently transmitting your signal, reducing the risk of damaging your CB radio.

How do I connect an SWR meter to my CB radio and antenna?
1. Connect the cable from your antenna system into the "ANT" connection on the back of the meter.
2. Take one end of a short jumper cable and connect it into the "TRANS" (the front is labeled "TX") connector on the meter.
3. Take the other end of the jumper cable and attach it to the CB radio's antenna jack
What if my SWR is high on all channels?
A high SWR across all channels indicates there's something wrong in your antenna setup. Here are some of the most common problems in getting your antenna tuned.

• Poor ground connection - Most mobile antennas need a good ground plane to work properly. Ensure your antenna mount has a solid electrical connection to the vehicle's chassis. Clean paint, rust, and dirt from the mounting surface. If your vehicle has non-metallic parts like RV's and sports carts or if the ground plane is inadequate, you can install ground straps to connect different metal parts of the vehicle, enhancing the overall ground plane.

• Bad coaxial cable or connectors - Inspect the cable and look for damage along the cable. If you see corrosion on the cable or connectors it's time for them to be replaced. • Improper installation - Check to make sure the antenna mount is attached and check your antenna stud to ensure the nylon washer is where it should be. If you have an antenna stud make sure your nylon washer is in the correct spot. For studs with a PL-259 the isolation washer should be just above the bracket.

• Obstructions - Nearby obstructions can affect your readings. Make sure you're in an open area and that the antenna is positioned so the signal won't be reflected off of the vehicle body or cab.

Does this work with ICOMs or Kenwoods?

No it does not

How do I test my radio's power ouput with this meter?

Flip the right switch into the PWR position and set the left switch based off of your power range. For your basic CB radio the 10 Watt position will do, or switch into the 100 watt scale if you're using more than 10 watts. Key down on your microphone without speaking to read your RF power (deadkey). Key the microphone and talk directly into the mic to check your modulation or swing wattage.

What trucks does the CASP4 fit?

The CASP4 is compatible with Freightliner Cascadia P4 and P5 models (2018+)

Why buy Walcott Radio from Walcott Radio

  • 30-day hassle-free returnsChanged your mind? Send it back within 30 days.
  • Fast shippingMost orders arrive in 2–3 days from our Iowa warehouse.
  • Real radio peoplePhone and chat support from staff who install this gear every day.

Walcott Radio reviews

4.2
★★★★★
142 reviews across 71 products
5★
92
4★
18
3★
11
2★
11
1★
10
★★★★★Verified buyer

Works great!

I have this guy up only about 15 feet in the air in the yard and it's been working great! I'm able to pick up and reach all the local repeaters with this antenna and my Midland MXT500. Would buy again!

Jesse D. · Aug 2026 · BASE_GMRS_ANTENNA
★★★★★Verified buyer

Fantastic way to get a base station set up

This is a very nice way to take a transportable radio and make it into a base station with the power fan and speaker. All in one can’t beat it especially for the price works wonderful.

Michael H. · Aug 2026 · K-621
★★★★★Verified buyer

PT99

Received my PT99 antenna fast and undamaged. Haven't put it in the air yet but hear good good things about it

Dwayne K. · Jul 2026 · PT99

Discontinued Walcott Radio products

201 models · 129 have a replacement

Still running one? Each card links to its product page and to what replaced it.

Recharge Kit for Cobra Handheld CB Radios
Discontinued
Walcott Radio COBRA-RECHAR
Recharge Kit for Cobra Handheld CB Radios
Keep Your Cobra Handheld Portable! NiMH High Capacity Batteries And Wall Charger For Your Handheld Cobra Radio Will Keep You On The Move. Recharging kit for the Cobra "HH" series handheld CB radios. Specifically designed and tested on the Cobra HH38WXST and Cobra HHROADTRIP CB radios. This kit allows you to install rechargeable batteries in your radio, then you can plug your radio into a standard AC wall socket and charge the batteries up when you want to use your radio. This is an ideal solution if you're tired of using up the standard alkaline batteries.