• 20 Amp Power Line Filter -- No Plugs

20 Amp Power Line Filter -- No Plugs

Will This Work? - Try This Simple Test! While hearing the noise you want to filter, unscrew and unplug the coax antenna cable from the back of your radio (don't transmit!). If the noise is still there, the filter should work. If is goes away, you are receiving noise as a signal. This device lets you filter out unwanted RF interference, static, or noise with this power line filter. Rated up to 20A this filter will work with radios that output up to 100 watts PeP.

  • 20 Amp DC Power Line Filter
  • Requires hard-wire

844-925-2688

Call to order NF40

Item #: NF40

6 Remaining In Stock
$18.95

Walcott Radio NF40 Overview

Filter out unwanted RF interference, static, or noise with this power line filter. Rated up to 20A this filter will work with radios that output up to 100 watts PeP. There are no power plugs included, so you will need to install directly inline with your radio's power line.

Walcott Radio NF40 Reviews

Hours & Location
  • 2940 N Plainview Rd Walcott, Iowa 52773 USA MAP
  • Store Hours: M - F 9 - 6 | Sat 9 - 5 | Sun Closed
Copyright 2021 Walcott Radio
Visit our Store! 2940 N Plainview Rd Walcott, Iowa 52773 USA