- Description
- Technical Details
Designed to enhance any serious operators shack, this rack-mounted unit offers exceptional sound quality and large, easy-to-use controls. The RCI-2995DXCF has features that include: AM-CW-FM-SSB modes of operation, variable power, noise blanker and built-in heavy duty AC power supply and provides 100 watts PEP output, and a rear panel frequency meter output for measuring transmit operating frequency.
RCI2995DXCF Features
- Hi Power 200 Watts PeP AM & SSB Transmit Power Output
- Incorporates a Twin Cooling Fan
- 10 and 12 Meter Bands
- 16 Programmable/Erasable Frequencies
- Programmable Repeater Split
- Large 6 Digits Frequency Display With Dimmer
- Large, easy-to-read dual panel meters
- Improved Receiver Design For Increased Sensitivity And Image Rejections
- Variable Output Power Control
- White LED Meter & Frequency Display Lights
- Double FET Balanced Mixer For Improved Receiver Intermodulation Rejection
| Frequency Range | 12 meter 24.890 - 24.990 MHz | 10 meter 28.000 - 29.699 MHz | ||
|---|---|---|---|
| Modes | AM / FM / USB / LSB / CW | ||
| Tuning Steps | 100 Hz, 1 KHz, 10 KHz, 100 KHz, 1 MHz | ||
| Frequency Control | Dual Phase-lock-loop Synthesizer | ||
| Frequency Tolerance / Stability | 0.005% / 0.001% | ||
| Operating Temperature Range | -4°F to 122°F | ||
| Microphone | Plug-In (6-Pin), 400W Dynamic PTT | ||
| AC Input Voltage | 100120VAC 60Hz | ||
| AC Power Consumption | 300W | ||
| Antenna Connectors | Standard SO-239 Type | ||
| Meter 1 | Indicates relative - RF Power Output/Antenna SWR | ||
| Meter 2 | Indicates Received - Signal Strength/AM Modulation | ||
| Transmitter | |||
| RF Power Output | 80W RMS | CW/AM/FM, 200W PeP | AM/USB/LSB |
| SSB Generation | Dual-Balanced Modulation | ||
| AM Modulation | Class B Amplitude Modulation | ||
| FM Deviation | ±4KHz @ 1KHz 30mV Audio (±5KHz max.) | ||
| Clarifier Range | ±5 KHz | ||
| Harmonic and Spurious Emission | Better than 60 dB | ||
| AM/FM Frequency Response | 400 to 5000 Hz | ||
| SSB Frequency Response | 400 to 3000 Hz | ||
| Output Impedance | 50 Ohms Unbalanced | ||
| Output Indicators | RF Meter shows relative RF Output Power | ||
| Receiver | |||
| Sensitivity | AM/CW | 0.50uV for 10dB S+N/N | |
| Sensitivity | FM | 0.25uV for 12dB S+N/N | |
| Sensitivity | USB/LSB | 0.15uV for 10dB S+N/N | |
| AM/FM Selectivity | 50dB at 10 KHz | ||
| SSB Selectivity | 60dB at 4 KHz | ||
| Image Rejection | More than 50dB | ||
| IF Rejection | More than 80dB | ||
| Adjacent Channel Rejection | >50 dB | ||
| Audio Frequency Response | 400 to 2500 Hz | ||
| Distortion | Less than 10% at 2Watts Output into 8 Ohms | ||
| Squelch | Adjustable-Threshold less than 0.7 uV | ||
| Cross Modulation | >50 dB | ||
| Intermediate Frequency | 10.695MHz (AM-1st, SSB), 455KHz (AM-2nd) | ||
| Clarifier Range | ±5 KHz | ||
| Noise Blanker | IF Single Gate Type | ||
| Audio Output Power | More than 3 Watts into 8 Ohms | ||
| Built-in Speaker | 8 Ohms | ||
| External Speaker (Optional) | Disables Internal Speaker when connected | ||
Ranger RCI2995DXCF Reviews
Overall rating
- 52
- 4
- 3
- 2
- 11
walter B.
13 years ago
I have this radios, has stable output, ( no drift) is good on both AM & SSB has a nice receive that hears good. If this radio will not do it for you, I will be very surprised, I myself like the Green background better than the Black background. You can pump up the modulation easy to 100% but if you go past that it going to splatter, this radio has lots of modulation so be careful................Oldtimer
Robert A.
16 years ago
I currently own at least 12 to 15 radios CB as well as Ham. I have never had as many problems with a radio like I have had with this one and this is not a cheap radio. RCI2995DX
The first one I had less then 3 months when the output went I sent it back for repair at my shipping expense and it was returned and the audio was bad and the meters had problems. They have since replaced that radio with a new one.
Iam now sending back the NEW ONE for the very same problem NO OUTPUT. Ranger must have a design problem with this radio I don't know what the answer is but we need to address this issue. By the way Walcott CB has been great with handling these problems.
Regards,
Robert K2RAL
The first one I had less then 3 months when the output went I sent it back for repair at my shipping expense and it was returned and the audio was bad and the meters had problems. They have since replaced that radio with a new one.
Iam now sending back the NEW ONE for the very same problem NO OUTPUT. Ranger must have a design problem with this radio I don't know what the answer is but we need to address this issue. By the way Walcott CB has been great with handling these problems.
Regards,
Robert K2RAL
David H.
18 years ago
I have had alot of radios in the past but not a Ranger, Ibought a Ranger 2995DX you might think that it is a little high in cost but as the saying goes, YOU GET WHAT YOU PAY FOR!!! After getting use to the set up of the unit it is outstanding! I allso recomend the TUNE UP its worth it.
Contact Us
📍
- Walcott Radio
- 2940 N Plainview Rd Walcott
- Walcott, IA 52773
📞
- Phone Support
- 1-844-925-2688
- M-F 10am to 5pm CST
🕘
- Store Hours
- M-F 9am-6pm
- Sat 9am-5pm
- Sun Closed
Shop
My Account
Customer Service
Company Information
Copyright 2025 Walcott Radio
Visit our Store! 2940 N Plainview Rd Walcott, Iowa 52773 USA