Radio Mounting Systems

Pickup trucks older build before the year 2000 typically have a large "hump" on the floor under the dash, between the driver and passenger seat. This is the most common location for installing a CB radio bracket. In newer pickup trucks you often have much less space to work with. The sides of the armrest separating the driver and passenger usually contain a small pocket for maps, pens, etc. With a bit of creativity you can mount smaller radios to this spot. Or, there is usually enough space on the floor to mount a radio and position it vertically with a taller mount.

Cars typically work best with more compact CB's. The easiest solution is to wedge the radio between the seat and arm rest, or to mount the radio to the side of the arm rest itself. In some cars you have enough room to mount the radio to the floor - but this will require drilling into your floorboard and using a long enough mount.

In big trucks, you usually have an existing compartment designed to hold or support your radio. Either on your dash, or in the overhead. You need to make sure you have a functioning antenna system with a low SWR reading. Also, many big trucks have a custom power cord connector that isn't compatible with most CB's. The fix here is to cut off the OEM plug, and connect your power wires directly to the truck wiring.