• Firestik MU8R18 - 2-Piece

Firestik MU8R18 - 2-Piece "EZ-Install" Single Coax

  • MU8R18 2-Piece 18ft "EZ-Install" Single Coax w. Firering Connector


Call to order MU8R18

Item #: MU8R18

In Stock

Select Your Upgrades View all

CB Antenna stud mount Stainless Steel K4-SS
104 - Moldable Plastic Coax Seal Tape (Excellent Sealer)
CB Antenna Spring Firestik - SS3H - Stainless Steel Spring

Firestik MU8R18 Overview

Now you can take advantage of the benefits of our exclusive FireRing connector and have the ease and convenience of being able to route your coax to the radio without the need for holes or passages that could be as large as one-inch. This cable is routed from the mount to the radio and the female mini-UHF connector will pass through a hole that is only 7/16" (11mm)in diameter.

After reaching the radio, completion is as simple as screwing on the supplied mini-UHF/PL-259 adapter and then screwing the PL to the radios antenna connection. No coax to process ... no soldering joints to complete and no tools needed. 18 Feet in length.

For those of you who know Firestik, you know the we would never compromise the quality of the coaxial cable for the conveniences found within this unique assembly. While we are best known for our hi-performance antennas, the antennas can not be expected to perform to their maximum potential if the coaxial cable is unable to deliver what the radio has to offer. As with all of our cable assemblies, we are as picky with what lies between the connectors as we are with the connectors themselves.

Firestik MU8R18 Specifications

  • Length18ft
  • ConnectorsPL-259 Connector (screw on) to Firering
  • Impedance50 OHM

Firestik MU8R18 Reviews

Andy B.
Submitted 9 years ago.
✔ Verified Purchase
Good for a year....After a year buy something else....I had this about a year and the fire ring wore right off. I drive a truck and I have never hit any tree branches. Great brand name Poor Design.
Keith R.
Submitted 15 years ago.
Firestik cable is a very good cable, easy to install, but be careful not to "overtighten" the stud down on the unit because it could bust loose the solder connection
Write a Review
  • 1
  • 0
  • 0
  • 1
  • 0