• Firestik K-8NGP Replacement 18 Foot No Ground Plane Coax Cable for NGP Antennas

Firestik K-8NGP Replacement 18 Foot No Ground Plane Coax Cable for NGP Antennas

  • Designed Specifically for Firestik NGP (No Ground Plane) CB Antennas -- this cable will not work with standard ground plane required antennas
  • 18' Long
  • PL-259 Connector to Lug Style connector

844-925-2688

Call to order K8NGP

Item #: K8NGP

Backordered
NO DATE AVAILABLE
This item is backordered from the manufacturer. We do not have an expected in stock date at this time.
$39.95
+ SAVE more. Add to cart for additional savings
Fast Shipping & Delivery
Free Phone Support

Firestik K8NGP Overview

The Firestik K-8NGP is a tuned coaxial cable assembly that can only be used with special no-ground-plane antennas. This coaxial cable will not work with any standard ground plane dependent CB antenna. We offer it for replacement purposes (in the case of a damaged cable assembly from one of our no-ground-plane kits) or, for those who may be making an NGP kit while using a mount not found in one of our NGP kits. There are four primary components to a NGP antenna system ... the NGP antenna, the NGP coaxial cable assembly, the stud mount and the primary mount. The first three items are mandatory. As long as the primary mount has a 1/2-inch (25mm) hole to accept the stud mount, it will suffice.

Because the K-8NGP coax contains a tuned circuit, reducing the length of the cable by as little as 1/4-inch (5mm) could render it useless. While there are some cases where the installation may dictate a small reduction in the length of the cable, this must be done carefully and with a degree of knowledge as to what effects on the resonant frequency that reducing the length will have on the assembly.

The NGP systems ONLY use the center lead of the coax to feed the antenna. The shield side of the coax is used to form the counterpoise (ground plane) that all transmitting antennas require. Many cables have been ruined by those unfamiliar with NGP systems. They think we made a mistake building the cable assembly so they reprocess the end and render it useless. We recommend that the ring terminal be soldered on instead of crimped (allows easy removal in case that need ever occurs).

Firestik K8NGP Features

  • Stranded center conductor to maximize flexibility and prevent untimely breakage.
  • 100% foil shielding to eliminate leakage.
  • 95% braided copper shielding over the foil for double protection.
  • Polyvinyl center insulation for ruggedness and longevity.
  • Performance that exceeds any similar product.

Firestik K8NGP Specifications

18' Long
50 Ohm

Firestik K8NGP Reviews

Contact Us

📍
  • Walcott Radio
  • 2940 N Plainview Rd Walcott
  • Walcott, IA 52773
📞
  • Phone Support
  • 1-844-925-2688
  • M-F 10am to 5pm CST
🕘
  • Store Hours
  • M-F 9am-6pm
  • Sat 9am-5pm
  • Sun Closed
Copyright 2022 Walcott Radio
Visit our Store! 2940 N Plainview Rd Walcott, Iowa 52773 USA