• Stryker SR-A10 High Performance CB and 10 Meter 10000 Watt Antenna
  • sra10-nowm.jpg
  • sra10-nowm.jpg
  • sra10-nowm.jpg
  • sra10-nowm.jpg

Stryker SR-A10 High Performance CB and 10 Meter 10000 Watt Antenna

Complete Your Stryker Installation With This Matched Antenna. High performance, durable good looking antenna for most semi truck installations.

  • *Update* Now includes two 10" shafts for a total shaft length of 20"
  • If you use both shafts, you will need to cut the whip down an additional 4-8" to tune properly
  • If you use a single 10" shaft, tuning will be normal

844-925-2688

Call to order SRA10

Item #: SRA10

Stryker
Only 4 Left In Stock
$99.95
+ SAVE more. Add to cart for additional savings
Fast Shipping & Delivery
Free Phone Support

Customers Also Purchased

Heavy Duty CB Antenna Mirror Mount with Heavy Duty Stud
18 Foot Heavy Duty RG8X CB Radio Coax Cable - Most Popular 188X
SWR Meter + Coax Jumper + SWR Booklet Bundle
CB Antenna stud mount Oversize Brass Antenna Stud

Stryker SRA10 Overview

UPDATE Stryker is now included 2 10" shafts, making the total length below the coil 20". This can cause high SWR issues unless you make some changes. If you're in a Kenworth T6XX truck, or a Freightliner Cascadia you will need to use the 20" total length. However, this will require you to cut a lot of the whip down to get your SWR set. If you use both shafts, you may need to cut over 4-8" of the whip off to get your SWR set. Alternatively, if you remove one of the shafts and reduce the overall length to 10" below the coil, you may have to remove much less, or none of the whip to get your SWR set.

Stryker SR-A10 CB Antenna


Stryker takes pride to introduce its phenomenal stainless-steel CB antenna called Stryker SR-A10.
The New Stryker SR-A10 CB antenna is inspired by the US Air Force Thunderbolt II affectionately nicknamed 'The Warthog'. The Warthog is renowned for its extreme durability and lethality, thanks to the 30mm Gatling gun.
The SR-A10s bold styling leaves little doubt that it can take care of business, and it will! Durability is maximized because Stryker SR-A10 CB antenna uses a double walled coil cover to protect it from the elements; no one else offers this. These two layers of high impact mobay thermoplastic can absorb a tremendous amount of abuse. The top and bottom covers are sealed with special o-rings to prevent water from reaching the coil.

Bigger in performance it's guaranteed


If you are wondering what makes the A10 any better than your current stainless-steel CB antenna, it is the coil. The heart of the antenna is the extremely efficient air-wound coil; making performance exceptional. This coil is wound with 6 gauge solid copper wire that is 100% plated in pure silver; this makes the coil highly conductive.
The Stryker SR-A10 CB antenna design results in significantly less static receive noise. Trust us; your ears will not miss it!

Shell is doubled means coil is SAFE


Open coil antennas and there are many, look neat, but a dirty coil reduces performance properties of the antenna, ice or snow can cut performance in half. Thanks to the double wall coil cover, you never have to worry about that on the SR-A10. To offer a high-performance, stainless-steel CB antenna that's tough enough to withstand daily abuse on a truck. Moreover, corrosion will stay far away from it where you will find the ordinary antenna withering off gradually because of that layer of rust

Higher "Q" value, for greater efficiency


Manufacturers have ensured quality in every aspect of this unique cb antenna. The coil was designed for a high "Q". The higher the "Q", the greater efficiency, meaning it is a higher performance antenna all over the market. This stainless-steel CB antenna can carry your talk safely over long ranges and can also receive the incoming signals with the clarity that your ears will not miss it.

We did not spare any expense in the design and construction of this antenna. Why buy a top of the line radio and choke its performance with cheap antennas? Quality and Performance cost a little more, but the results more than make-up for it. Regardless of performance, cheaply made antennas do not hold up to the elements and can end up costing you more in the long run. Stop wasting your time replacing and tuning antennas that aren't up to the task. The SR-A10 comes with a two-year warranty and is built to handle the use and abuse that you encounter daily. Buy with confidence, You will not be disappointed.

FAQ

How do I tune Stryker SRA10 Antennas?

Check your SWR on channels 1, 20 and 40. If channel 40 is higher than one, remove the whip from the antenna, cut 1" off, then re-install and re-check your readings. Keep doing this until channels 1 and 40 have the same reading. For more detailed steps, check our guide here SWR Tuning Guide

Stryker SRA10 Specifications

6 Gauge Solid Copper 100% Silver Plate Wire
10,000 Watts Power Handling Capability
Extremely Efficient High Coil
Double Wall Coil Cover made from High Impact Mobay Plastic
Can be Tune for 26 - 30 Mhz
10 in Stainless Steel Shaft
49 in Stainless Steel Whip
Reduced Static Interference
Standard 3/8 in Thread on Shaft
2 Year Warranty

Stryker SRA10 Reviews

jon k.
Submitted 3 months ago.
✔ Verified Purchase
i was told the stryker sr-a10 or predator 10k i couldnt get the swr on the predator to come down so i tried this one after cutting off 2.75" 1:1-1:2 swr love this antenna would buy another one any day
Jacob H.
Submitted 1 year ago.
User only left a rating
Aaron C.
Submitted 2 years ago.
I bought this antenna online and got it fast. I didn't know at the time,
but it lights up blue when you key up. I have a low SWR and great performance
with this antenna, matched with a Stryker SR-497HPC radio.
Write a Review
  • 3
  • 0
  • 0
  • 0
  • 0

Contact Us

📍
  • Walcott Radio
  • 2940 N Plainview Rd Walcott
  • Walcott, IA 52773
📞
  • Phone Support
  • 1-844-925-2688
  • M-F 10am to 5pm CST
🕘
  • Store Hours
  • M-F 9am-6pm
  • Sat 9am-5pm
  • Sun Closed
Copyright 2022 Walcott Radio
Visit our Store! 2940 N Plainview Rd Walcott, Iowa 52773 USA