- Description
- Technical Details
Get a complete Base Station system with this package. Everything you need for a ready to go, high performance 10 and 12 meter radio system.
Get your base station up and running with this complete package. We've hand-selected the President Lincoln II to give you a high powered, excellent SSB 10 meter radio that can work on 11 meters, combined with a high performance omni-directional Solarcon Antron A99 base station antenna and 50 feet of RG8 coax cable.
Make sure to select the PEAK option if you want 11 meters added to the radio.
LINCOLN_BASE Features
- President Lincoln II+ 10 Meter RadioAM/FM/LSB/USB/CW Modes, 50 Watts PeP Output Power, Selectable Multi-Color Display
- Astron Power SupplyRegulated DC Power Supply
- Solarcon Antron A99 Antenna2000 Watt CB Radio Base Antenna, 18 feet Tall, Easy SWR Tuning, Includes U-Bolt Mounts
- RG213 50' Coax Cable50' Long, Includes 2x PL259 Connectors Pre-Soldered, RG8U Cable, 50 Ohm
LINCOLN_BASE Technical Specifications
Important notes on power output
|
|---|
Measuring power output will vary depending on many variables. Our default test-setup consists of a 14-volt power supply, 50 ohm dummy load, and Bird wattmeter reading PeP (peak envelope power). If you are using different equipment, measuring RMS instead of PeP, or have an SWR reading different that shown, you may have different results. The following chart shows an example of power readings for this radio with changes to measurement variables. Final note, the Dosy meter referenced below is directly affected by the SWR readings in the antenna system. You may notice huge differences in power readings from subtle changes in SWR.
|
|---|
|
|
|---|
| Meter | Bird Wattmeter
|
|---|
| Voltage | 14VDC
|
|---|
| SWR | 1.2 with dummy load
|
|---|
| Impedance | 50 ohm
|
|---|
| AM Carrier (low w/ 50W slug) | 2W
|
|---|
| AM Carrier (high w/ 50W slug) | 12W
|
|---|
| AM Modulation (PeP w/ 100W slug) | 50W
|
|---|
| SSB (w/ 100W slug) | 42W
|
|---|
|
|
|---|
Standard Specifications
|
|---|
| Voltage | 14VDC
|
|---|
| SWR | 1.2 with dummy load - 1.5 with Antron A99 Antenna
|
|---|
| Impedance | 50 ohm
|
|---|
| AM Carrier (low @ 20W scale) | 2W-4W
|
|---|
| AM Carrier (high @ 20W scale) | 12-18W
|
|---|
| AM Modulation (PeP @ 200W scale) | 40-55W
|
|---|
| SSB | 40-70W
|
|---|
|
|
|---|
Standard Specifications
|
|---|
| Height | 52mm (2in)
|
|---|
| Width | 170mm (6.7in)
|
|---|
| Length | 250mm (9.8in)
|
|---|
| Current | 5A |
|---|
President Lincoln Base Station Package Reviews
I have the same exact setup
I have the same exact setup. Im srry i did not purchase my radio coax or power supply from walcott but I did buy my Antron 99 from them and I would recommend buying from walcott, they do good business. I came to walcott after purchasing a proton 99 from amazon that i could never get the swr below 2. So i decided I would never buy anything from amazon again and that I would purchase my next antenna from a reputable radio shop. I found walcott and they are my new go to. I purchased an antron 99 from them and put it and didnt have to adjust for swr it was 1.2 out of the box. To get the point I have a lincoln 2 plus 50ft rg8 coax and the antron 99 and I get the same results that are in the details for this setup. I talk all over the world. This setup works great and it would be a great starter setup for anybody looking to get into the hobby and get a base setup going. I hope this helps.
Contact Us
📍
- Walcott Radio
- 2940 N Plainview Rd Walcott
- Walcott, IA 52773
📞
- Phone Support
- 1-844-925-2688
- M-F 10am to 5pm CST
🕘
- Store Hours
- M-F 9am-6pm
- Sat 9am-5pm
- Sun Closed
Copyright 2024 Walcott Radio
Visit our Store! 2940 N Plainview Rd Walcott, Iowa 52773 USA
