CB Radio Whip - Replacement stingers / whips

Stainless CB Radio Whips from 32 ~ 66 inches for Wilson, Stryker, RoadPro, K40, and Predator antennas.

CB Antenna Whips Products

Sort 14 Items

Filter results

Shop by Brand

Why a CB antenna whip will take your CB radio experience to the next level!

Whether your ride is a semi-trailer, a pickup truck, or you operate your CB radio system from various locations. You probably know the importance of using high-quality gear. If you love using your CB radio and want to enjoy the highest quality signal, you can possibly get, then you should definitely purchase yourself a CB radio whip antenna. A CB radio whip antenna will enhance the performance of your CB radio.

As you might know, the antenna is arguably the most crucial component of any CB radio system. The quality of the antenna you install will determine the quality of the sound, the range from which you can receive signals, and the range to which you will be able to transmit signals. The higher the antenna's quality, the radius of the reception and transmission range will grow, respectively, and the sound quality will naturally improve.

It is essential to understand that all the CB radio systems available in the market today come with no more than 4 watts of power. This means that eventually, it all comes down to purchasing a good quality antenna and installing it correctly and properly. No matter how good your CB radio system is, using a fiberglass antenna will only enable you to enjoy its features to a certain extent.

This ¼ wave antenna is a top-rated option that's most commonly found on pickups or off-road vehicles but can be used on virtually anything you drive. Constructed tough from stainless steel, you'll want to use a sturdy mount as the 102" is beefy and can really torque your mounting surface. A good option for such a heavy-duty antenna is to use a Ball mount and a heavy-duty spring.

Keep in mind that unlike a magnet mount antenna that you can just simply attach to most surfaces, with a CB radio antenna whip, it is quite likely you will need to dedicate some time to decide where would be best to mount it as you will probably need to do some drilling in order to secure the mount properly in place. 

Like the fiberglass antennas and the magnet mount antennas, a CB whip antenna also operates using a coax cable transferring signals to be received or transmitted to the CB radio unit itself. Yet, the radius from which signals are received from and transmitted to, and the quality of those signals put CB whip antennas on a whole different level. 

Constructed with heavy-duty stainless steel, these antennas are certainly the way to go. Just keep in mind that when buying electronics, it is best to purchase such equipment from a verified, experienced retailer. Remember that it is essential to choose an antenna manufactured by an excellent well-known brand such as Wilson K40 or Francis, who are among the best brands in the world. Other leading brands worth checking out include:

  • Roadpro
  • Hustler
  • Solarcon
  • Cobra
  • Firestik
  • Predator

So, if you want to step up your game and do not know where to begin, a CB radio whip antenna will substantially increase your CB radio system's performance. When it comes to choosing the best antenna for your CB radio system, you should not cut corners. Fortunately, with our policy of offering great affordable prices all year round, there is no need to wait for sales, so purchase your CB antenna whip today and enjoy the most adequate CB radio experience.

There are many reasons to use a CB radio system, and using the right gear will make all the difference, so whether you use a CB radio for work for fun and leisure time or both, you should definitely check out Walcott Radio - CB Radio & Electronics's store and website, find out the best deals and get the latest information about CB radio high-quality gear and accessorize.

10+ In Stock - Fast Shipping
Replacement 62" stinger whip for Stryker SR-A10 magnetic antennas

Model: Stryker SRA10MM-WHIP

Key Features
  • 62" Long
  • Tapered Stainless Steel
  • Stryker whips for Stryker CB antennas
10+ In Stock - Fast Shipping
Wilson 880-900501 Replacement Set Screw

Model: Wilson Antenna 900501

Key Features
  • For Wilson T2000, T5000 and FGT Series CB Antennas
  • 10/32 inch x 1/16 inch
  • Set screw
10+ In Stock - Fast Shipping
Predator Long and Thin Stainless Steel Stinger Whip for Double Coil and 27 inch Shaft Predator Antennas

Model: Predator K2-WHIP

Key Features
  • 58" Long
  • 1/8" Diameter Steel
  • Large Corona Ball
was $14.95
Save $4.00 (27%)
10+ In Stock - Fast Shipping
300122 LittleWil Replacement Stinger Whip 880-300122

Model: Wilson Antenna 300122

Key Features
  • 36" Stainless Steel Tapered Stinger / Whip
  • Exact replacement for Wilson Little Wil magnetic antenna
10+ In Stock - Fast Shipping
Wilson 2000 Trucker 49" Replacement Stinger Whip 305-900905

Model: Wilson Antenna 900905

Key Features
  • 49 inch Tapered Stainless Steel Whip
  • For Wilson 2000 & 5000 Trucker Antennas
10+ In Stock - Fast Shipping
Wilson 62" Replacement Stinger Whip 880-900901

Model: Wilson Antenna 900901

Key Features
  • 62" Stainless Steel Tapered Stinger / Whip
  • For Wilson 1000 and 5000 Magnetic, Roof and Trunk antennas.
  • (not for the Wilson 5000 Trucker -- those antennas use the 49" whip)
10+ In Stock - Fast Shipping
880-900817 - Wilson Short Load Stinger Whip

Model: Wilson Antenna 900817

Key Features
  • * Shorten your Wilson 1000 or 5000 stinger / whip length from the stock 62 inches down to 39 inches with this whip
Only 9 left!
Stryker 49 inch Replacement Antenna Stinger Whip for SR-A10 Trucker Antenna

Model: Stryker SRA10-WHIP

Key Features
  • 49" Long
  • Stainless Steel
  • Stryker stinger / whips for Stryker CB antennas
Only 1 left!
K100 Replacement Stinger Whip For K40 Antenna

Model: K40 Electronics K100

Only 8 left!
500106 Wilson 500 Replacement Stinger Whip 880-500106

Model: Wilson Antenna 500106

Only 6 left!
Wilson 2 Meter Replacement 47 inch Whip Stinger 880-900904

Model: Wilson Antenna 900904

Temporarily Sold Out
Predator K1-Whip Replacement Stinger Whip for Single Coil antennas with shafts 22 inches or shorter

Model: Predator K1-WHIP

Key Features
  • 52" Long
  • Predator Stinger / Whip
  • Used in all single coil Predator antennas (except the 27" shaft version)
Backordered - No Date AvailableThis item is backordered from the manufacturer. We do not have an expected in stock date at this time.
Stryker SR-A10 Replacement Set Screw

Model: Stryker LARGE_SCREW

Contact Us

  • Walcott Radio
  • 2940 N Plainview Rd Walcott
  • Walcott, IA 52773
  • Phone Support
  • 1-844-925-2688
  • M-F 10am to 5pm CST
  • Store Hours
  • M-F 9am-6pm
  • Sat 9am-5pm
  • Sun Closed
Copyright 2024 Walcott Radio
Visit our Store! 2940 N Plainview Rd Walcott, Iowa 52773 USA